PDA

View Full Version : Bulb edge seal

Purple Venom
03-03-2009, 10:33 PM
Think this is the stuff I need to go back around the aluminum edges? If so, about how much will I need? http://www.mcmaster.com/#1120a562/=ui275
PaulProe
03-03-2009, 10:44 PM
Tim
You'll need about 6" more than you bought :( :mad:

'bout all you can do is measure each strip that you're going to need. I'd leave 6" more than you measure, then add all the different lengths together to come up with an overall.

Before you order anything from McMaster, take a drive by Old Dog Street Rods. They've added a new rack of weatherstripping and may have the stuff you're looking for, there in stock. They sell it by the foot. Their prices seemed competitive - and the inventory is right here so if you need a couple more feet . . .

Paul
Purple Venom
03-03-2009, 10:55 PM
I didn't order any yet, was just pasting the link to the page for reference. I've looked there at OD's, but they didn't have. They do have the door,hood and trunk seal though.
TBULL
03-03-2009, 10:58 PM
I thought the bulb part of it was more like 1" inch instead of 9/16". I'll measure some of mine.
TOM KEISER
03-04-2009, 12:56 PM
Tim,
1120A562 is widely accepted as the correct seal to order. That's what I have shown in my phone :D.
Purple Venom
03-04-2009, 01:09 PM
Tom's magic phone strikes again! :cool: :D Thanks Tom! Ok, will 30' per car be enough?
TOM KEISER
03-04-2009, 01:25 PM
I think 30' will do it.
Purple Venom
03-04-2009, 01:45 PM
Found Whitby has it for $1.50/ft as opposed to $2.44/ft at MC - http://www.whitbymotorsports.com/UInvDetail.asp?inventoryid=1601
TBULL
03-04-2009, 02:19 PM
I'm telling you we need to download that phone somewhere! :D If you're ordering, please double and I'll split the shipping with you. Just let me know.
mike w
03-04-2009, 03:31 PM
Think this is the stuff I need to go back around the aluminum edges? If so, about how much will I need? http://www.mcmaster.com/#1120a562/=ui275
you can also use automotive door edge guard sold by crest automoyive in fenton or rubber vacuum hose and split with exacto knife
Purple Venom
03-05-2009, 08:43 PM
Alright Dan, I ordered 70' from Whitby's at $1.55/ft. Will be here next week. You going to be ready to put your body back on then, right?
TBULL
03-05-2009, 09:32 PM
Maybe the next weekend. I have to finish up a couple of things first, but definitely by Easter.:rolleyes: I hope, I hope , I hope. Man I wish I was out driving it today.