Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    VICE PRESIDENT, Member # 032
    MPTech's Avatar
    Join Date
    Feb 2009
    Location
    St. Louis (south county)
    Posts
    2,421
    Rides
    1

    Default Andrew: looking for front-end alignment

    Andrew,
    You asked for a recommendation for a good place to get your front-end aligned.
    John Zentz (from Hunter Engineering) recommended Jumper's and I took my car there in 2013.
    Jumper's Auto Service

    He did a great job and I can personally recommend his work as well. Thanks again John Z!
    F5R #7446: MK4, 302, T5 midshift, 3.55 Posi IRS, 17" Halibrands
    Delivered 4/4/11, First start 9/29/12, Licensed 4/24/13, Painted 4/10/14

  2. #2
    PRESIDENT, FORUM MODERATOR, Member # 015

    Purple Venom's Avatar
    Join Date
    Apr 2008
    Location
    St. Charles
    Posts
    9,778

    Default

    This is who I used, and they also do a great job:
    Alignment Specialist Inc
    410 Little Hills Industrial Blvd
    St Charles, MO 63301
    (636) 925-1339
    FFR# ????, 460 Big Block, Quickfuel 750 Mechanical Sec., Edelbrock Torker II Intake port matched to Cobra Jet heads, 447 rwhp and 459 rwtq, T5, 8.8 4 link, 3.55 rear, 4 wheel disc, Color - 2007 Ford/Toyota Orange Crush with Ingot Silver Stripes, Never completed

  3. #3
    TREASURER, Member # 010
    TBULL's Avatar
    Join Date
    Apr 2008
    Location
    House Springs
    Posts
    2,704

    Default

    Quote Originally Posted by MPTech View Post
    Andrew,
    You asked for a recommendation for a good place to get your front-end aligned.
    John Zentz (from Hunter Engineering) recommended Jumper's and I took my car there in 2013.
    Jumper's Auto Service

    He did a great job and I can personally recommend his work as well. Thanks again John Z!
    I went to high school with the owner. Nice guys there and they race on weekends. They know their stuff.
    T-Bull FFR MKII #4402 Sterling Grey w/ Black stripes, Supercharged 308 (Rebuilt Forged 2014 with DSS Main Girdle) with Modified Powerdyne, GT-40 Heads, F-Cam, Mass-Flo Fuel Injection, Snow Performance Stage 3 Intercooller, RWHP 445, Tan Leather Interior, Dual Rollbars, 3-Link, Competition Bump Steer Kit, Dropped Trunk Mod, Front Sway bar, (Whatever is Next)
    PFTK

  4. #4
    Member #083 TaylorH's Avatar
    Join Date
    Jun 2016
    Location
    Ofallon
    Posts
    166

    Default

    Is Harris Automotive in Wentzville a good place to get an alignment? I though I heard a couple guys in St Charles recommend them, but can't exactly remember...

  5. #5
    Member #087 Gracie's Avatar
    Join Date
    Sep 2016
    Location
    Lake Saint Louis
    Posts
    405

    Default

    Yes Taylor: My son Ian C. went to high school with JERMEY HARRIS / Owner...he knows BOTH of us well (Ian Sr. and Ian Jr) call him 636-327-4042....tell him I recommended them. They do inspection on my Cobra...excellent shop...ASK FOR JERMEY, and introduce yourself. In the same breath, FRANJO (Frank Bick) uses DOBBS TIRE right there in Chesterfield. Call Frank and ask him 314-492-5100...good luck

  6. #6
    Member #083 TaylorH's Avatar
    Join Date
    Jun 2016
    Location
    Ofallon
    Posts
    166

    Default

    Quote Originally Posted by Gracie View Post
    Yes Taylor: My son Ian C. went to high school with JERMEY HARRIS / Owner...he knows BOTH of us well (Ian Sr. and Ian Jr) call him 636-327-4042....tell him I recommended them. They do inspection on my Cobra...excellent shop...ASK FOR JERMEY, and introduce yourself.
    Will do, thanks. Hopefully I don't veer off the road on the drive there.

  7. #7
    Member #049 Richgrsc's Avatar
    Join Date
    Oct 2010
    Location
    St. Charles
    Posts
    1,638

    Default

    Quote Originally Posted by TaylorH View Post
    Is Harris Automotive in Wentzville a good place to get an alignment? I though I heard a couple guys in St Charles recommend them, but can't exactly remember...
    Yes I go there with ALL my repair and alignment work. They have aligned both my cobras . Good people

  8. #8

    Join Date
    Apr 2017
    Location
    Darddenne Prairie
    Posts
    11

    Default

    I have Alignment tools to do your own, I did mine it wasn't that hard and it drives perfect. If your interested let me know. I live close .

  9. #9
    PRESIDENT, FORUM MODERATOR, Member # 015

    Purple Venom's Avatar
    Join Date
    Apr 2008
    Location
    St. Charles
    Posts
    9,778

    Default

    Ron, did you set Camber/Caster?
    FFR# ????, 460 Big Block, Quickfuel 750 Mechanical Sec., Edelbrock Torker II Intake port matched to Cobra Jet heads, 447 rwhp and 459 rwtq, T5, 8.8 4 link, 3.55 rear, 4 wheel disc, Color - 2007 Ford/Toyota Orange Crush with Ingot Silver Stripes, Never completed

  10. #10

    Join Date
    Apr 2017
    Location
    Darddenne Prairie
    Posts
    11

    Default

    Yes I did, Its really not that hard with the tool I have.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •