Results 1 to 6 of 6

Thread: Alignment Specs

  1. #1

    Default Alignment Specs

    Afternoon All,

    Looking for opinions of front wheel alignment specs..... if you are running Power Steering how much Caster, Camber and Toe do you run ?

    Thanks in advance
    Last edited by AshleyG; 05-10-2019 at 02:28 PM.

  2. #2

    Default

    .
    Factory Five MK IV 4.6 DOHC T45 5 Speed.... work in progress

  3. #3
    Member #083 TaylorH's Avatar
    Join Date
    Jun 2016
    Location
    Ofallon
    Posts
    253

    Default

    I had the following written down on a post-it note.
    -.5 degree camber
    +3.5 to 4 degree of caster. (I think power steering uses 10 degrees)
    3/32" inch of toe in

  4. #4
    Member #049 Richgrsc's Avatar
    Join Date
    Oct 2010
    Location
    St. Charles
    Posts
    1,897

    Default

    If you have power steering try to get around 8 degrees of caster.

  5. #5
    Member #044 itzdapig's Avatar
    Join Date
    Nov 2009
    Location
    St.Charles
    Posts
    1,079

    Default

    Here is my set up
    camber -.7
    caster 6.2
    toe .02*
    Factory Five MK3.1,302 EFI,T5 ,3.55's,Tubular control arms,4 wheel disc's,17x11 and 17x9.5 Levy wheels,255 and 315 Kumho Ecstas, Hydroboost power steering and brakes,QJ delete front and back,Custom hood and side louvers,Dequire nose.

  6. #6

    Default

    Thanks... going to try and get it an alignment this week if the rain hold off
    Factory Five MK IV 4.6 DOHC T45 5 Speed.... work in progress

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •