Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Super Administrator GCC's Avatar
    Name:
    Paul Proefrock
    Join Date
    Jan 2015
    Location
    Manchester, MO
    Posts
    431
    Rides
    0

    Default Welcome Mark Meyerhoff

    Another cobra is about to be born, this time in Foristell. Received membership of Mark Meyerhoff who has just purchased a Factory Five Mk IV w/IRS and a lot of other goodies. Comes with a Blueprint Small Block.

    Mark, Logon and tell us more - Welcome to the madness

  2. #2

    Name:
    Mark Meyerhoff
    Join Date
    Oct 2019
    Location
    Foristell
    Posts
    2

    Default

    Hello everyone! I placed my MK4 Roadster order a couple weeks ago with Factory Five. Completion date is Nov 23, then Stewart will deliver it (hopefully soon) thereafter.

    Here is what I have ordered from FFR...
    Powder coated frame
    Power steering
    EFI in-tank fuel system
    Front & rear Wilwood brakes
    Body cutouts
    IRS
    Leather seats
    Wind wings
    Sun visors
    17” Halibrand wheels and tires
    Chrome driver roll bar
    Vintage gauge set
    Assembled side Louvers
    Hydraulic clutch
    Stainless steel bumpers

    Other companies/suppliers
    Blueprint 347 w/EFI
    Gas-N sidepipes
    Cobrastuff - sidepipes heat shield
    Gordon Levy door panels
    Rutgers Rod Shop - triple reservoir

    Can’t wait to get started! Garage is ready and body buck has been built.

    I have never done anything like this before but I did attend the Build school a couple weeks ago and nothing seemed too complicated. However, I’m sure I will run into a number of “challenges”.

  3. #3
    Member #047 33ratride's Avatar
    Name:
    Rick Hubbard
    Join Date
    Jun 2010
    Location
    Florissant
    Posts
    1,227

    Default

    Welcome to the club, don't be shy if you need help or have a question give out a shout.
    FFR 6525 Mk3.1, 347, EFI, 3 Link, 8.8w/ 3.73, 4 piston Baer disc brakes all around, T-5 with S-10 Mid-Shift.

  4. #4
    SECRETARY, Member # 015
    Purple Venom's Avatar
    Name:
    Tim Mauldin
    Join Date
    Apr 2008
    Location
    St. Charles
    Posts
    10,836

    Default

    Welcome! And yeah, there are some very knowledgeable people in the club with probably more than a dozen builds among us. Congrats on the purchase and look forward to following your build!
    Tim
    FFR# ????, 460 Big Block, Quickfuel 750 Mechanical Sec., Edelbrock Torker II Intake port matched to Cobra Jet heads, 428 rwhp and 437 rwtq, T5, 8.8 4 link, 3.55 rear, 4 wheel disc, Color - 2007 Ford/Toyota Orange Crush with Ingot Silver Stripes, Never completed

  5. #5
    Member #049 Richgrsc's Avatar
    Name:
    Rich Schipper
    Join Date
    Oct 2010
    Location
    O'Fallon
    Posts
    2,303

    Default

    Welcome

  6. #6
    VICE PRESIDENT, Member # 010
    TBULL's Avatar
    Name:
    Dan Turnbull
    Join Date
    Apr 2008
    Location
    House Springs
    Posts
    3,289

    Default

    Welcome to the madness. If you need a car dolley, don't build one. I have one sitting around that you can use. It makes it real easy to spin the car around in the early stages. I'm currently working on an older MKIV.
    FFR #4402 Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes Purchase 8/22/2008 Sold 12/04/2018
    FFR #8249 "Milano" Kit purchased 10/5/2018 - In-Process

  7. #7

    Name:
    Mark Meyerhoff
    Join Date
    Oct 2019
    Location
    Foristell
    Posts
    2

    Default

    Thanks for the welcome wishes and the offers of help..and Thanks for the car dolly offer. I have a separate 4 car garage and quite a bit of room... so don’t think I will need one but will definitely keep you in mind if I decide differently. Hope it is delivered shortly after FFR completion date...��

  8. #8
    PRESIDENT, Member # 032
    MPTech's Avatar
    Name:
    Mark Patterson
    Join Date
    Feb 2009
    Location
    St. Louis (south county)
    Posts
    3,186

    Default

    Sounds like a very well equipped build, looking forward to your progress. Keep us posted.
    F5R #7446: MK4, 302, T5 midshift, 3.55 Posi IRS, 17" Halibrands
    Delivered 4/4/11, First start 9/29/12, Licensed 4/24/13, Painted 4/10/14

  9. #9

    Name:
    Ashley Grayden
    Join Date
    Jan 2019
    Location
    St. Charles
    Posts
    78

    Default

    Welcome Mark
    Factory Five MK IV 4.6 DOHC T45 5 Speed.... work in progress

  10. #10
    Member #077
    Name:
    Tony Goebel
    Join Date
    May 2015
    Location
    O'Fallon
    Posts
    716

    Default

    Welcome to the Club.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •